This Kit includes the WIZwiki-W7500 board, USB cable, LAN cable, breadboards, jumper wires, sensors, buttons, LEDs and resistors for users to implement the hardware DIY.
Using a variety of libraries and sample code posted on the ARM mbed, any novice user can easily implement one’s own application.
This starter kit is suitable for beginners who want to make IoT device
Because WIZwiki-W7500 platform board has been mbed-enabled, user can use free on-line compiler and various examples in mbed.org site.
This kit includes a USB cable, a LAN cable, two breadboards, jumper wires, sensors, buttons, LEDs and resistors.
Part Name Description Q.Ty WIZwiki-W7500 ARM Cortex-M0 Test Board 1 USB cable USB Mini-B, 1meter 1 LAN cable CAT5, 1meter 1 Breadboard 55 x 85 mm 2 Resistor (330 Ohm) 1/4W J(5%) 330 Ohm 20 Resistor (10K Ohm) 1/4W J(5%) 10K Ohm 20 Pushbutton Switch Momentary Pushbutton Switch 4 LED (Red) 5pi DIP type Red LED 5 LED (Green) 5pi DIP type Green LED 5 LED (Yellow) 5pi DIP type Yellow LED 5 LED (RGB) RED/GREEN/BLUE Triple Color LED 3 Rotary Potentiometer Rotary Potentiometer / 10K Ohm 1 Humidity & TemperaturDHT11 (Humidity & Temperature Sensor) 1 Temperature Sensor TMP36GT9 (Low Voltage Temperature Sensor) 1 Photo Resistor PGM5537D (CDS Photo Resistor) 1 Magnetic Buzzer SM-1205C (Magnetic Buzzer) 1 Jumper Wire (M/M) Various Colors, 26 AWG, 6" (15 cm) Jumper wires 40 Jumper Wire (M/F) Various Colors, 26 AWG, 8" (20 cm) Jumper wires 10
|Country of Manufacture||South Korea|
|Support||Do you have a question or need technical support?|